Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on a Mercedes CLC?

Model: Mercedes CLC Cl203 - Years: 2008, 2009, 2010, 2011
Part: EGR valve

Video tutorial

In this tutorial, you will see how to remove the EGR valve on a Mercedes CLC, a very simple and quick operation. First, ensure the engine is completely cold, then open the bonnet and remove the plastic cover.

Next, locate the valve in question, disconnect the indicated connector using a flathead screwdriver, and with an E10 socket, unscrew the two securing bolts. Now disconnect the pipe, grasp the valve, and pull it out of its housing.

To install the replacement, simply follow the reverse procedure.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mercedes CLC
How to Replace the Key Battery on a Mercedes CLC
Mercedes CLC (2008-2011 / Cl203) Replacing the battery in a Mercedes CLC key independently is a procedure that will take only a few minutes. The first step is to extract the emergenc…
How to check the engine oil level in the Mercedes CLC?
How to check the engine oil level in the Mercedes CLC?
Mercedes CLC (2008-2011 / Cl203) In this tutorial, see how to check the engine oil level in the Mercedes CLC, a task to be performed via the onboard computer as the traditional dipst…
How to Replace the Light Switch on a Mercedes CLC
How to Replace the Light Switch on a Mercedes CLC
Mercedes CLC (2008-2011 / Cl203) To replace the light switch on a Mercedes CLC, open the driver's door and then detach the side panel of the dashboard. Once this is removed, you can …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos