Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Mercedes C-Class?

Model: Mercedes Classe C W206 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Mercedes C-Class, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to navigate through the onboard computer menu.

Select "Settings" and then go to the "Maintenance" section. Once in the maintenance menu, look for the "Reset Service" option.

Follow the instructions displayed to complete the reset. Typically, you will need to confirm the action by holding down a button for a few seconds.

Continue following the prompts until the system confirms that the "Service" light has been reset. After completing the reset, turn off and then turn on the ignition again to verify that the light has indeed turned off. This process ensures that the service reminder is cleared and that the vehicle is ready for the next maintenance interval.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. To reset the Service light on the Mercedes C-Class, turn on the ignition by turning the key in the ignition switch. Once the instrument panel is on,.. …
Mercedes Classe C (2007-2013 / W204) .. The service light on a Mercedes-Benz C-Class vehicle turns on when it is time to perform the required maintenance service. Basic maintenance.. …
Mercedes Classe C (2007-2013 / W204) .. the "Service" light on your Mercedes-Benz C-Class. Start by turning on the vehicle and checking that the "Service" indicator is visible on the display... …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos