|
Do it yourself
| |||
| ||||
How to Remove the Cabin Air Filter in No Time
Model: Mercedes Sl
R230
- Years:
2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Video tutorial
The cabin air filter purifies the air inside the vehicle and is located under the glove compartment on the passenger side. Obtain two identical cabin air filters of the same model as the original. To access the removal, unscrew the screws of the panel on the passenger side and move the covering. Disconnect the plastic clips that hold the filter cover by simply moving them. Once the filter cover is removed, take out the filters by pulling them outward carefully to avoid dust dispersal. Place a cloth on the floor to catch any dirt. Insert the new filters into the housing and close the cover with the clips. Be careful when opening and closing the clips, as they are made of plastic and can break if not handled with care, compromising the seal of the filter cover.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Mercedes Sl
(1989-2001 /
MK 5, R129)
The cabin air filter housing is located in the engine compartment, along the left edge when viewed from the front: once you open the hood, locate the…
Mercedes Sl
(2001-2011 /
R230)
If the factory radio in your Mercedes Sl R230 (model years 2001-2011) is experiencing various malfunctions, don't worry because you can reset it quic…
Mercedes Sl
(1989-2001 /
MK 5, R129)
Whenever you change the oil in your engine, you should also change the oil filter, which purifies the oil circulating in the engine from impurities a…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |