Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2022 MG 3

Model: MG 3 MK 2 - Years 2011-2024
Part: Service warning light

To manually reset the service light on your 2022 MG 3, follow the steps outlined in this guide. First, get inside the car and sit in the driver's seat. Then, turn on the ignition and press the button located at the end of the left lever on the steering wheel multiple times. Locate the maintenance screen for the vehicle, then pull the lever towards you while holding down the same button used earlier. Wait for the reset to complete, and you're done.

Posted on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the MG 3.
Resetting the service light on the MG 3.
MG 3 (2011-2024 / MK 2) Below we will discover how to reset the service maintenance light for the regular oil change of the MG 3 gearbox. First, we get into the car and star…
How to reset the service light on the MG MG3?
How to reset the service light on the MG MG3?
MG 3 (2024-2026 / MK 3) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and quick operation, to be carried out only once all schedule…
How to reset the service in the MG MG3?
How to reset the service in the MG MG3?
MG 3 (2011-2024 / MK 2) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and fast operation, to be carried out only once all scheduled…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos