Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the 2021 MG ZS

Model: MG ZS Zs11 - Years 2017-2024
Part: Service warning light

After performing a complete service on your 2021 MG ZS, you will want to know how to reset the service light to know exactly when to perform the next maintenance. To learn this, follow the steps illustrated in the video. First, turn on the instrument cluster and wait a few seconds for initialization, then use the buttons on the right side of the steering wheel to enter the onboard computer menu and select the gear icon (the settings menu) and then "next service." At this point, to reset the service light, simply press and hold the OK button for about ten seconds.

Posted on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2019 MG ZS
How to reset the service light on the 2019 MG ZS
MG ZS (2017-2024 / Zs11) The service light reset, related to the car service, on a 2019 MG ZS vehicle must be performed using a diagnostic computer. To perform the reset of t…
Service reset on a MG ZS
Service reset on a MG ZS
MG ZS (2017-2024 / Zs11) In this very useful guide, we are shown how to perform a service reset using the right steering wheel keypad on an MG ZS, a model produced from 2017 …
How to reset the service light on the MG ZS
How to reset the service light on the MG ZS
MG ZS (2017-2024 / Zs11) Today we will explain how to reset the maintenance light for the MG ZS car. To reset the light, we need to turn on the vehicle and press the menu but…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos