Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the MG Hector remote control battery?

Model: MG Hector MK 1 - Years 2019-2026
Part: Key

As we can see in this tutorial, replacing the MG Hector remote control battery is a very quick and easy operation. To do this, we will need a replacement CR2032 battery and a small flat-tip screwdriver. First of all we press the side button and extract the emergency key, then, with the help of the screwdriver if necessary, we separate the two halves of the remote control by prying into the newly released slot. Once fully opened, we can remove the old battery and insert the spare one, taking care to respect the polarity.

Posted on 14 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the MG Hector remote control battery?
How do I replace the MG Hector remote control battery?
MG Hector (2019-2026 / MK 1) In order to replace the battery of the remote control of the MH Hector it is necessary to remove the emergency key from the upper part of the remote …
How to replace the MG Hector remote control battery?
MG Hector (2019-2026 / MK 1) Replacing the MG Hector remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, let's get a re…
How to replace the MG Hector remote control battery?
How to replace the MG Hector remote control battery?
MG Hector (2019-2026 / MK 1) Replacing the MG Hector remote control battery is a very simple and fast operation, in this tutorial we can see how to proceed. To do this, we will n…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos