Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Door Panel of the MG ZS

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

See other generations:
Video tutorial

Today, in this video tutorial, you will learn how to remove and replace the front door panel of the MG ZS in simple and quick steps. First, open the front door and start unscrewing all the fastening screws found on the door panel (on the sides and inside the handles); then, pry on the sides of the panel to detach it and remove it completely, disconnecting the electrical connector for the window switch and the opening handle cable, as shown in the video.

Now, reassemble everything by applying the reverse procedure!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

MG ZS (2017-2024 / Zs11) Here are the step-by-step instructions to remove and replace the rear door panel on an MG ZS, following these simple steps. First, open the rear door…
MG ZS (2017-2024 / Zs11) To remove the door panel of the MG ZS, loosen the screws that secure the panel: these are located in the handle recess and under the small panel next…
MG ZS (2017-2024 / Zs11) In order to open the fuel door of the MG ZS, you need to access the interior of the car to locate the lever that unlocks the fuel door: it will be lo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos