Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Door Panel of the MG ZS?

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of the MG ZS, loosen the screws that secure the panel: these are located in the handle recess and under the small panel next to the window switch. Once these screws are loosened, you can unclip the internal clips that hold the panel, starting from the bottom of the door.

When all the clips are unclipped, disconnect the window switch connector, and you can completely remove the old panel, replacing it with a new one.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

MG ZS (2017-2024 / Zs11) Here are the step-by-step instructions to remove and replace the rear door panel on an MG ZS, following these simple steps. First, open the rear door…
MG ZS (2017-2024 / Zs11) To install the backup camera on the MG ZS, use a tool to pry off the internal cover of the trunk. Underneath, you can insert the backup camera, fitti…
MG ZS (2017-2024 / Zs11) Today, in this video tutorial, you will learn how to remove and replace the front door panel of the MG ZS in simple and quick steps. First, open the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos