Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Wires on an MG 3?

Model: MG 3 MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the ignition wires on an MG 3, open the hood to access the components inside the engine bay. You will need to unscrew the bolts securing the plastic cover on top of the engine block to access the wires. Disconnect these from the injectors and remove them from their housing, replacing them with new replacement parts.

After replacement, reinsert the plastic cover on top of the engine block, ensuring everything functions correctly.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tire Light of the MG 3
How to Reset the Tire Light of the MG 3
MG 3 (2008-2011 / MK 1) If, after changing or inflating the tires on your MG 3, you notice the tire warning light is on, don't worry because the problem can be easily resolv…
How to Charge the Battery of the MG 3
How to Charge the Battery of the MG 3
MG 3 (2011-2024 / MK 2) Let's go through the steps to recharge the 12 V battery of the MG 3, following the instructions below. First, open the hood of your car and begin con…
How to Replace the Rear Headlight Bulb on the MG 3?
How to Replace the Rear Headlight Bulb on the MG 3?
MG 3 (2011-2024 / MK 2) To replace the rear headlight bulb on the MG 3, open the trunk of the car to access the two screws next to it. Once the screws next to the gasket are…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos