|
Do it yourself
| |||
| ||||
How to install the steering wheel spacer on a Mini Cooper S.
Model: Mini Mini
R53, R50, R52
- Years 2001-2007
In this video, we see how to install the steering wheel spacer on a Mini: first, we disconnect the negative pole of the battery. Using a flathead screwdriver with a ground tip, we release the airbag through the two small holes on the extreme sides of the steering wheel. We remove the two electrical connectors of the airbag, and then we begin with those of the steering wheel: there is a large one on the left and one on the right. We then loosen the central screw and check that the steering wheel moves freely and is not stuck. The spacer can be found on spacershop for 245.00 euros and is perfectly compatible; it also includes the wiring for extending the wires. (A cheaper option, but more elaborate for installation, can be found on Amazon for 25.65 euros, code B0957CN355 with free delivery for Prime customers). The installation here is very simple; reconnect the wires, being careful because the spaces are very small. Close the central key and then reconnect the airbag. Connect the connectors and then put the airbag back in place, it is an easy job but requires a lot of patience.
Posted on 9 December 2023 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2014-2023 /
F55, F56, F57, F54)
Today we will see the main instructions useful for disassembling and replacing the steering wheel and its airbag of the Mini Cooper. First of all, we…
Mini
(2001-2007 /
R53, R50, R52)
Before we are able to start, we will have to disconnect the battery of our Mini Cooper, so as to work safely. We start by sitting in the driver's sea…
Mini
(2007-2014 /
R55, R57, R56)
Before we can start, we will have to disconnect the battery, so as to work in total safety, and then we will have to go and sit in the driver's seat …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Cabin Air Filter on a Toyota Yaris
To carry out this operation, locate the position of the filter for replacement. It is situated behind the small glove compartment in front of the front passenger seat. Open the compartment and push the two side parts to release the latch, allowing you to remove it completely. This will enable you to push the clips that secure the filter cover. Remove the cover and extract the filter, taking care to note the orientation of the filter. Reinstall the new filter in the correct direction. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.185
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |