Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

Today, follow the steps to open the bonnet of the Mitsubishi Pajero, as outlined below. First, open the front door of the vehicle and pull the lever located at the bottom on the driver's side; this will unlock the bonnet latch, as shown in the video.

Next, release the lever found between the grille and the bonnet, lifting the bonnet held by the hydraulic struts; finally, lower the bonnet to close it, applying some pressure!


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Mitsubishi Pajero?
How to replace the battery in the Mitsubishi Pajero?
Mitsubishi Pajero (2006-2021 / V80, MK 4) In this tutorial, we will see how to replace the battery in a Mitsubishi Pajero, a very simple and quick operation. First of all, let's make sure tha…
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
How to replace the front headlight bulb of the Mitsubishi Pajero
How to replace the front headlight bulb of the Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Today we will discover the instructions on how to disassemble and replace the low beam bulb of the front headlight of the Mitsubishi Pajero. First, w…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos