Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Satellite Navigation System

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

The satellite navigation control unit comes with the necessary wiring for connection to the plug and play sockets. To carry out the installation, remove the original radio and other elements of the centre console to allow for the placement of the GPS antenna, which should be positioned at the top of the dashboard, just below the windscreen.

Once the wiring is in place, make the connections as per the attached diagram and proceed with the installation of the monitor (with the necessary mounting brackets) and the plastic trim to be applied as a frame around the monitor.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to set up the satellite navigator on a 2015 Mitsubishi Outlander
How to set up the satellite navigator on a 2015 Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Let's see how to set the satellite navigator of the 2015 Mitsubishi Outlander: it is not an intuitive system, but once we understand the method it is…
Rear Disc and Pad Replacement
Rear Disc and Pad Replacement
Mitsubishi Outlander (2007-2012 / MK 2) To replace the rear discs and pads, lift the vehicle on the ramp and remove the rear wheel. Then unscrew only the lower bolt of the caliper and rotat…
Replacing Front Shock Absorbers
Replacing Front Shock Absorbers
Mitsubishi Outlander (2007-2012 / MK 2) To replace the front shock absorbers, first obtain the appropriate clamps to compress the springs; then lift the vehicle on a lift and remove the fro…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos