Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Pajero
    4. : The fuse box on Mitsubishi Pajero

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero MK 2, V20 - Years 1991-1999
Part: Fuse box
Operation: The fuse box on Mitsubishi Pajero

In this video tutorial you can see where the fuse box is located on Mitsubishi Pajero V20 and how you can replace a blown fuse in complete autonomy, without necessarily consulting a professional. First you need to know that the fuse box on Mitsubishi Pajero V20 is located under the dashboard. The second box is located in the engine compartment at the battery. The fuses are numbered according to a diagram on the instrument panel (see maintenance booklet). This arrangement allows correct identification and correct management in the event that the blown fuse needs to be replaced. So referring to the diagram and the numbering of the fuses, you have to lift the cover of the box where the fuses are located; taking care with pliers take the fuse and replace it with a working one that has the same amperage.


Posted on 19 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Pajero 2006-2021 - Where are the fuse boxes of the Mitsubishi Pajero v80 located? Read Answer
    • Pajero 2006-2021 - Where are the fuses located on Mitsubishi Pajero? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos