Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to DIY Replace the Leather Trim on the Front Door of the Mitsubishi Freeca

Model: Mitsubishi Freeca MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

Video tutorial

If over time the leather trim on the door panel gets damaged, this video shows how to replace it without going to a shop. Start by removing the door lock, then take out the screw from the handle and the one inside the handle assembly.

At this point, detach all the plastic clips around the panel using a screwdriver and remove the panel. Next, unscrew the screws of the leather trim mentioned and remove the leather to proceed with installing the new one. Measure the new piece, cut it, and secure it with tape before reattaching it to the door panel.

Finally, reposition the panel inside the door and reassemble the handle and lock.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Mitsubishi Adventure - Freeca
How to Replace the Front Wipers on the Mitsubishi Adventure - Freeca
Mitsubishi Freeca (1997-2017 / MK 1) In this video tutorial, follow the step-by-step instructions to remove and replace the front wipers on the Mitsubishi Adventure and Freeca. First, mo…
How to Replace the Fuel Filter on a Mitsubishi Freeca?
How to Replace the Fuel Filter on a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) To replace the fuel filter on a Mitsubishi Freeca, open the hood to access the components inside the engine bay: on the right side, you will find the…
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
How to Replace the Tail Light Bulbs in a Mitsubishi Freeca?
Mitsubishi Freeca (1997-2017 / MK 1) In this tutorial, see how to replace the tail light bulbs in a Mitsubishi Freeca, also marketed as Adventure. First, ensure the key is not in the ign…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos