Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Key Battery on a Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

If you need to replace the remote key battery on this vehicle, you can find instructions in this description and also refer to the video. First, extract the emergency key by pressing the small button located at the back.

Using the emergency key or a pointed object, lever at the joint between the key and the cover to detach the cover. Underneath, you will find the battery compartment, which you can remove using a pointed object.

Then, take the new battery and place it in the compartment, ensuring the positive terminal is facing upwards. Finally, close the remote cover, and you're done.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Mitsubishi ASX
How to Replace the Key Battery of the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Today, you will learn how to replace the battery in a Mitsubishi ASX key. You will need to purchase a 3 Volt CR2032 battery for the replacement. Star…
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
How to Replace the Battery in a Mitsubishi ASX
How to Replace the Battery in a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Today, follow this brief and simple guide for instructions on how to remove and replace the battery in a Mitsubishi ASX. First, open the bonnet of yo…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos