Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Mirage
    4. : How to replace the rear light bulbs in the Mitsubishi Mirage?

Mitsubishi Mirage - Video tutorial

Model: Mitsubishi Mirage LA, A00, A10 - Years 2012-2023
Part: Rear light bulb
Operation: How to replace the rear light bulbs in the Mitsubishi Mirage?

As we can see in this tutorial, replacing the rear headlight bulbs in the Mitsubishi Mirage is a very simple and quick operation. Before proceeding, let's make sure that the key is not inserted so that we can work safely. Let's start by opening the trunk door, then, using a classic cross-tip screwdriver, unscrew the two bolts located along the inner side of the headlight, pull it towards us, and separate it from the body. Once this is done, we can remove the faulty bulb by slightly rotating it counterclockwise, replace it, and reassemble everything following the reverse procedure.


Posted on 8 July 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos