Do it yourself
| ||||
|
Mitsubishi Space Star - Video tutorial
Model: Mitsubishi Space Star
MK 1
- Years 1998-2005 If you want to check for errors in the control unit of your Mitsubishi Space Star, and you have bought an OBD II reader for this purpose, you are now looking for the EOBD socket, which, as you have seen in all the videos or on your friends' cars, is usually located near the steering wheel or in the footwell, between the steering wheel and the driver's door. However, this is not the case with Mitsubishi. They have decided to place it in an unusual location. In fact, it is located under the storage compartment in the center tunnel. You need to gently remove the compartment with two cup holders using a screwdriver, and underneath you will find the EOBD port and another socket.
Posted on 10 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |