Do it yourself
| ||||
|
Mitsubishi Outlander - Video tutorial
Model: Mitsubishi Outlander
MK 2
- Years 2007-2012 As a first step it will be necessary to understand where the diesel filter is located, it is located inside the tank, therefore it will be necessary to reach the tank, to reach it, lift the mat behind the luggage rack and you will then find a gray panel sealed with a gasket. silicone, then lift it up and disconnect the flow and return pipes as well as the electrical plugs. Now unscrew the bolts on the circular ring nut of the tank cap and remove the diesel filter, now you just have to install the new filter and reassemble everything.
Posted on 25 September 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |