Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Pajero
  6. : How to replace the rear light bulbs on Mitsubishi Pajero

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Part: Tail light
Operation: How to replace the rear light bulbs on Mitsubishi Pajero

Open the boot lid of your car, to be sure to buy the right material for your car you can consult the information booklet which is located together with the other documents in the glovebox in front of the front passenger seat. Then carry out the operations necessary to remove the headlight, i.e. remove the screws that secure the headlight, in order to be able to extract it, disconnect the plug on the back and replace the bulbs concerned, now then you just have to go through the steps described in backwards for reassembly.


Posted on 30 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos