Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Nissan Pathfinder MK 3, R51 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

The necessary equipment consists of fixed spanners, a ratchet spanner, the required amount of oil for the change, and a new filter cartridge. Open the oil cap on the engine and place a container under the engine to collect the used oil. Undo the oil cap on the sump and let it drain, then replace the cap. Remove the protection under the engine to access the oil filter.

Slightly undo the filter to allow the contained oil to drain, then remove it from its housing. Take out the old cartridge and replace it with a new one, also changing the O-ring seal.

Using a funnel, top up with new oil. Check the correct level on the dipstick. Do not dispose of used oil in the environment; take it to the appropriate collection centres.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the Nissan Pathfinder
How to Replace the Cabin Air Filter on the Nissan Pathfinder
Nissan Pathfinder (2012-2020 / MK 4, R52) Are you planning to replace the cabin air filter on this car model? From the description below, we have gathered all the information and steps necess…
How to Replace the Cabin Air Filter
How to Replace the Cabin Air Filter
Nissan Pathfinder (2005-2012 / MK 3, R51) Open the glove compartment, flex the left side wall as shown in the video, then pull from the right to completely disengage the door and allow full o…
How to Replace the Cabin Filter on Nissan Pathfinder
How to Replace the Cabin Filter on Nissan Pathfinder
Nissan Pathfinder (2005-2012 / MK 3, R51) In this video tutorial, see how to replace the cabin filter on a Nissan Pathfinder by following a few simple steps: first, purchase a new pollen filt…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos