Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the timing chain cover of the Nissan Juke 1.6

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Timing belt

In this guide, we will see the steps that will allow us to remove the timing chain cover of the Nissan Juke 1.6. First, lift the vehicle and start by removing the front right wheel; then proceed to remove the serpentine belt and the crankshaft pulley, as shown in the video. Next, unscrew the engine support bolts to remove it, then unscrew the timing chain cover bolts; once removed, you can proceed with the disassembly and replacement of the timing chain, following the video tutorial until the end!

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing chain of the Nissan Juke 1.6.
Guide to replacing the timing chain of the Nissan Juke 1.6.
Nissan Juke (2010-2019 / MK 1) The main steps today will show us how to disassemble and replace the timing chain of the Nissan Juke 1.6. First, we open the engine hood of the car a…
Replacing the timing chain on Nissan Juke
Replacing the timing chain on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the timing chain on a Nissan Juke. Let's see how it disassembles. We lift the front hood and remove the covers. We disassemble the front wh…
Timing chain replacement on Nissan Juke
Timing chain replacement on Nissan Juke
Nissan Juke (2010-2019 / MK 1) Juke timing chain replacement. Let's see how it goes. We lift the car on a column bridge and remove the front wheel, then the right stone guard. We r…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos