Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the airflow meter of a Nissan Qashqai 1.5 DCi

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: MAF sensor

See other generations:
Video tutorial

Let's see how to remove and replace the airflow meter (also known as MAF sensor) of a Nissan Qashqai: we remove the clamp of the tube that brings air to the sensor, then we remove the bolts that hold the sensor in place, being careful not to drop them inside the engine.

Once the sensor is removed, we see that it is actually very dirty inside, and we clean it with an electrical contact spray; we let it dry perfectly in the air and then we reassemble it by tightening the two fixing screws and putting back the clamp for the airflow.

The operation is now complete.


Posted on 24 February 2025 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on the Nissan Qashqai J10
How and When to Replace the Timing Belt on the Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Discover in this video the step-by-step instructions for removing and replacing the timing belt, and when to change it, on the Nissan Qashqai 1.5 DCI…
Replacing the Glow Plugs on a Nissan Qashqai 2.0 DCI
Replacing the Glow Plugs on a Nissan Qashqai 2.0 DCI
Nissan Qashqai (2006-2014 / J10) The following steps will guide you through removing and replacing the glow plugs on a Nissan Qashqai 2.0 DCI. First, open the bonnet of your car and …
When and how to replace the timing belt of the Nissan Qashqai 1.5 dCi
When and how to replace the timing belt of the Nissan Qashqai 1.5 dCi
Nissan Qashqai (2006-2014 / J10) Today's procedure will show us how and when to remove the timing belt of the Nissan Qashqai 1.5 dCi; the manufacturer states that the timing belt on …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos