Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light in the Nissan Navara NP300?

Model: Nissan Navara D23 - Years 2014-2024
Part: AdBlue warning light

The latest generation diesel cars, in addition to using diesel fuel, also use the additive adblue to reduce emissions from their exhaust gases. This additive is contained in its own tank, adjacent to the diesel tank, in which a level reading sensor alerts when it has reached reserve, causing the warning light on the dashboard to turn on. All we need to do is top up with the necessary and expected amount, so that the warning light turns off and we do not run the risk of being unable to use the vehicle.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Nissan Navara NP300
How to reset the service light on the Nissan Navara NP300
Nissan Navara (2014-2024 / D23) If the service light on the instrument panel of your Nissan Navara NP300 continues to come on despite having recently had the car serviced, it means …
How to reset the service light on the Nissan Navara NP300
How to reset the service light on the Nissan Navara NP300
Nissan Navara (2014-2024 / D23) Due to a small electronic error, it may happen that the service light on the dashboard of your Nissan Navara NP300 does not turn off even after corre…
Where to Find the Jack on a Nissan Navara NP300
Where to Find the Jack on a Nissan Navara NP300
Nissan Navara (2014-2024 / D23) On the Nissan Navara NP300, the jack and all other tools needed to remove a wheel are located in a compartment under the rear bench seat. To access t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos