Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil of a Nissan Qashqai?

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Service warning light

To change the motor oil of a Nissan Qashqai, start by parking the vehicle on a flat surface and make sure the engine is cold to avoid burns. Lift the car using a jack and secure it with appropriate stands to work safely. Locate the oil pan under the engine and find the drain plug. Place a suitable container under the plug to collect the used oil. Loosen the plug with a suitable wrench and remove it completely, allowing the oil to fully drain into the container. Once the draining is complete, reinstall the plug tightly. Proceed to pour the new oil into the engine using a funnel through the fill cap located in the engine compartment. Check the oil level with the dipstick to ensure it is correct, avoiding exceeding the maximum limit. After closing the fill cap, start the engine for a few minutes and check for any leaks under the vehicle.

Posted on 20 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2006-2014 / J10) To change the engine oil on a Nissan Qashqai, lift the car with a jack or ramp to access the screws securing the undertray at the bottom of the vehic…
Nissan Qashqai (2014-2022 / J11) Today we will discover the instructions that will help us in the process of replacing the engine oil and oil filter, performing the routine maintenan…
Nissan Qashqai (2014-2022 / J11) This short video tutorial will explain how to replace the oil filter and engine oil on the Nissan Qashqai 1.6 DCi. It is very important to use oil re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos