|
Do it yourself
| |||
| ||||
The correct way to reset or program TPMS on Nissan or Infiniti vehicles
Model: Nissan Sentra
MK 6, B16
- Years:
2007, 2008, 2009, 2010, 2011, 2012
Video tutorial
In this video we can see how to program or reset the TPMS on a Nissan (in this case a Sentra) or on an Infiniti. We need to find the OBD port, which is located on the left side of the steering column, under a plastic panel. Once found, insert a paperclip into the second hole, and turn on the ignition without starting the engine. Then we need to be very quick: count to six and the TPMS light will start flashing. We should wait for a minute, after which there are two methods: the first is to use a specific tool for this function: we can find the youtuber's tool on Amazon for 11.99 euros with the code B0CQ2FMJDJ, free delivery. We have three minutes to go around all the wheels, leaning on the sensor and pressing the button, starting from the driver's tire and then on all the others in sequence. Return to the driver's seat and the light is off. The second method is that after following the youtuber's suggestions, up to the point where we have to wait a minute (which is essential) if we do not have the tool we must start the engine and drive for a few kilometers and the car will learn automatically.
Posted on 27 July 2025 by ScegliAuto
Related tutorials
Nissan Sentra
(2012-2022 /
B17, MK 7)
In this tutorial we can see how to program a new remote control in the Nissan Sentra, an extremely simple and fast operation. To do this, we will obv…
Nissan Sentra
(1994-2002 /
MK 4, B14)
With car wrapping, you can change the appearance of your vehicle without going to a body shop and without using paints that require skill to apply. A…
Nissan Sentra
(2020-2026 /
B18, MK 8)
To remove the interior rearview mirror from the 2022 Nissan Sentra, locate the base of the mirror attached to the windshield. At the base, there is a…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |