Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the rear taillight of the Nissan Qashqai. First, we open the rear hatch of the trunk and start unscrewing the fixing screws found on the side of it; then we disconnect the electrical connector of the bulbs found on the back, detaching and removing the taillight definitively, as shown in the video.

At this point, we replace the headlight bulbs or the entire stoplight, fixing it correctly on the body and making the electrical connection!


Posted on 6 October 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Headlight and Bulbs on the Nissan Qashqai
How to Remove the Rear Headlight and Bulbs on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, let’s look at the instructions that will allow you to remove and replace the rear headlight and its bulbs on the Nissan Qashqai. First, open t…
How do you disassemble the front headlight of the Nissan Qashqai j11?
How do you disassemble the front headlight of the Nissan Qashqai j11?
Nissan Qashqai (2014-2022 / J11) It is important to highlight that the car shown in the video is a Nissan Qashqai j10, but since the technical intervention procedures are identical t…
How to replace the rear headlight bulb on a Nissan Qashqai 1?
How to replace the rear headlight bulb on a Nissan Qashqai 1?
Nissan Qashqai (2006-2014 / J10) In this guide, see how to disassemble and replace the headlight bulb on the first generation Nissan Qashqai, following the instructions below. First,…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos