Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

Remove the radio from the Qashqai if it is damaged. Remove the trim around the air conditioning controls, then use a plastic lever to detach the stereo's trim (where the air vents are located) from the centre console.

Once the stereo is free from constraints, use a screwdriver to unscrew the securing screws on either side. Pull out the stereo by hand and disconnect the cables (power and antenna).

Install the new radio, tighten the securing screws. Refit all the trim pieces of the centre console.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing the Standard Radio in the Nissan Qashqai
Replacing the Standard Radio in the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today's video tutorial will show you the main instructions on how to dismantle and replace the standard radio in the Nissan Qashqai. First, get insid…
How to Retrieve the Radio Code on a Nissan Qashqai?
How to Retrieve the Radio Code on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this short video, the procedure to retrieve the radio code for your Nissan Qashqai is shown. Intentionally enter a code of 4 random numbers three …
How to disassemble the center console and the car radio of the Nissan Qashqai.
How to disassemble the center console and the car radio of the Nissan Qashqai.
Nissan Qashqai (2014-2022 / J11) In this brief guide, we will see the instructions that will allow us to disassemble and remove the central console, which includes the car radio and …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to fix DAB radio problems on Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why is the radio of the Nissan Qashqai not working? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos