Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the door lock with the key on Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Key

How to open the door lock of Nissan Micra with the key? We use the key if the battery is low. We remove the cover on the side of the handle (driver side): we pry until the cover piece of the lock comes off. We put the key in the lock and open the car door. To close the lock, take the cap and press the handle with our hands until you hear the lock click. We replace the key remote control battery as soon as possible. If we have a damaged remote control we use the manual lock with the key until repaired.

Posted on 1 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How to open the locked trunk hatch of the Nissan Micra
How to open the locked trunk hatch of the Nissan Micra
Nissan Micra (2002-2010 / K12) Following these simple steps, we will see how to open the locked rear hatch in case of emergency of the Nissan Micra. First, open the rear doors and …
How to open Nissan Micra when the battery is dead.
How to open Nissan Micra when the battery is dead.
Nissan Micra (2002-2010 / K12) In this video, we see how to open a Nissan Micra when the battery is dead. In this case, it won't be possible to open the car with the remote control…
How to open the door with a low remote control battery on Nissan Micra
How to open the door with a low remote control battery on Nissan Micra
Nissan Micra (2002-2010 / K12) Let's see in this guide how to open the car when the remote control battery of a Nissan Micra second series is low, in simple steps. To do this, you …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos