Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J11
- Years 2014-2022 In this video we will see the instructions to permanently deactivate the start & stop system on a second series Nissan Qashqai. First we open the bonnet of our car; then with a socket wrench we go to remove the sensor bolt fixed on the frame, as shown in the video. At this point we are going to disconnect its electrical connector and remove the sensor together with its bracket; then let's reposition our sensor on the same position, fixing it with its screw. We will then see that our start & stop system has been disabled!
Posted on 1 January 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to open the Piaggio Beverly saddle with a flat batteryIn today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |