Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J11
- Years 2014-2022 Let's see together how to remove the start and stop sensor of a Nissan Qashqai. Let's open the bonnet, lift it up and put it in safety. Using a screwdriver, unscrew the tightening screws of the start and stop sensor valve (located in the engine compartment) on the plate that attaches to the car sheet. We remove the plate from both ends and we remove the sensor from the engine compartment, we disconnect the power supply terminals. After comparing the old piece with the new one, let's mount it in the engine compartment with attached pins and plate. We test the correct functioning of the start and stop.
Posted on 13 October 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to replace the AdBlue tank on Peugeot 3008In order to replace the AdBlue tank on the car it is necessary to know that it is located above the diesel tank and therefore under the rear trunk floor and to access it it is necessary: first of all lift the car on the deck, then remove the lower metal protective casing of the tank and under it we will find the diesel tank. Then proceed to disassemble the tank with the help of a forklift to support it. Once the diesel tank has been freed and lowered, above it we will find the small AdBlue tank. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |