Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Instrument cluster

Before you start, sit in the driver's seat of your Nissan Qashqai. First, lower the steering column completely. Next, unclip and remove the cover located beneath the instrument cluster. This will give you access to the screws that secure the instrument cluster to the vehicle. Proceed to unscrew and remove these screws. At this point, extract the instrument cluster from its housing. Once this step is completed, disconnect the rear electrical connector to fully remove the instrument cluster, completing the disassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on a Nissan Qashqai
How to Remove the Instrument Cluster on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and ta…
How to Reset the Airbag Light on a Nissan Qashqai
How to Reset the Airbag Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and tur…
How to reset the Service light on the Nissan Qashqai?
How to reset the Service light on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To reset the Service light on the Nissan Qashqai, turn on the ignition by turning the key. This will allow you to navigate the menu that appears on t…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - What does the "Service due now" message on the Nissan Qashqai mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos