Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

EGR Valve Replacement on Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: EGR valve

See other generations:
Video tutorial

Let's see how to remove the EGR valve on a Nissan Navara. Lift the front bonnet of the vehicle to access the inside of the engine compartment, remove the soundproofing panel from above the engine (if available), unscrew the fastening bolts of the EGR valve cover (located in the engine compartment) with a socket wrench, remove the valve from the engine seat and disconnect the various feed connectors with a screwdriver or needle-nose pliers.

After comparing the damaged valve with the new one, install it in the engine compartment. Start the engine for a functionality test.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Dismantle and Clean the EGR Valve of the Nissan Navara
How to Dismantle and Clean the EGR Valve of the Nissan Navara
Nissan Navara (2014-2024 / D23) In this video tutorial, you will see instructions on how to dismantle and clean the EGR valve of the Nissan Navara, following the steps outlined belo…
How to Remove the EGR Valve on a Nissan Navara
How to Remove the EGR Valve on a Nissan Navara
Nissan Navara (2005-2015 / D40) How do you remove the EGR valve fitted to a Nissan Navara? Lift the bonnet and secure it. Then, using a screwdriver, unscrew the locking pins of the …
How to replace the battery of the Nissan Navara key
How to replace the battery of the Nissan Navara key
Nissan Navara (2014-2024 / D23) Today we will explain how to replace the battery of a Nissan key. The steps to replace the battery of the Nissan Navara remote control are: - Unscrew…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos