Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to remove the EGR valve on Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: EGR valve
Operation: How to remove the EGR valve on Nissan Navara

How to disassemble the EGR valve mounted on a Nissan Navara? Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of the ventilation pipe (battery), remove the soundproofing panel of the engine. We begin to disassemble the locking pins of the EGR valve as in the video (if we have problems: we lift the car with a jack. Once the piece has been disassembled from its seat, we go to unscrew the screws on it with a screwdriver. the valve with the help of a product suitable for cleaning mechanical parts, we use a brush to facilitate operations.


Posted on 6 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Navara 2005-2015 - Where is the EGR valve located in a Nissan Navara with diesel engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos