Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle and Clean the EGR Valve of the Nissan Navara

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: EGR valve

See other generations:
Video tutorial

In this video tutorial, you will see instructions on how to dismantle and clean the EGR valve of the Nissan Navara, following the steps outlined below. First, open the bonnet of your vehicle and start by removing the air filter box cover by unclipping the tabs.

Next, disconnect the electrical connector of the valve and unscrew the securing bolts to remove it from the manifold, using a 10 mm socket spanner, as shown in the video. At this point, clean or replace the component, applying the reverse procedure!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

EGR Valve Replacement on Nissan Navara
EGR Valve Replacement on Nissan Navara
Nissan Navara (2005-2015 / D40) Let's see how to remove the EGR valve on a Nissan Navara. Lift the front bonnet of the vehicle to access the inside of the engine compartment, remove…
How to Remove the EGR Valve on a Nissan Navara
How to Remove the EGR Valve on a Nissan Navara
Nissan Navara (2005-2015 / D40) How do you remove the EGR valve fitted to a Nissan Navara? Lift the bonnet and secure it. Then, using a screwdriver, unscrew the locking pins of the …
Guide to Dismantling the Cylinder Head of the Nissan Navara
Guide to Dismantling the Cylinder Head of the Nissan Navara
Nissan Navara (2005-2015 / D40) Today's main steps will show you how to dismantle and replace the engine cylinder head of the Nissan Navara. First, open the bonnet and start removin…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos