Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Nissan Qashqai

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Body

This brief guide provides instructions on how to open the bonnet of the Nissan Qashqai by following these simple and quick steps. First, open the front door and pull the bonnet release lever located on the driver's side under the steering wheel. Then, move to the front and lift the small lever of the lock, situated in the centre of the gap (above the front bumper grille), as illustrated in the video. At this point, close the bonnet by pushing it down firmly!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Nissan Qashqai
How to Open the Bonnet of a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, sit in the driver's seat of your Nissan Qashqai. Begin by gently pulling towards you the lever located at the bottom left of th…
How to Open the Bonnet of a Nissan Qashqai
How to Open the Bonnet of a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today's guide will show you the steps to open the bonnet, allowing access to the engine compartment of the Nissan Qashqai. The steps are brief and ve…
How to Remove the Timing Belt from a Nissan Qashqai
How to Remove the Timing Belt from a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting, lift your Nissan Qashqai. Begin by removing the front wheel and the inner wheel arch by unscrewing the relevant bolts and clips. Nex…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos