Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Armada
    4. : How to reset the oil service in the Nissan Armada?

Nissan Armada - Video tutorial

Model: Nissan Armada Y62 - Years 2017-2024
Part: Checks and maintenance
Operation: How to reset the oil service in the Nissan Armada?

In this tutorial we can see how to reset the oil service in the Nissan Armada. Before carrying out this simple and quick operation, make sure that you have completed any maintenance work required. Let's start by inserting the key and turning on the instrument panel, then locate the two buttons we are going to use, located in the upper right area of the dashboard. Next, we scroll through the screens until we reach the settings one, enter "Maintenance" and select the engine oil service. At this point, we carry out the reset using the appropriate "Reset" function.


Posted on 28 May 2024 by ScegliAuto



How to reset the service light on the Nissan Armada 2020
Nissan Armada (2017-2024 / Y62) For this guide we will see how to reset the maintenance light for the Nissan Armada, model 2020. To proceed, the following steps must be performed in
How to reset service warning on Nissan Armada ta60
Nissan Armada (2004-2015 / Ta60) The guide shows how to reset the Nissan Armada ta60 service light. The first operation to perform is to enter the vehicle maintenance menu by pressin
How to reset the maintenance light in a Nissan Armada
Nissan Armada (2017-2024 / Y62) In this video tutorial we are shown how to perform the maintenance warning light reset procedure in a 2020 Nissan Armada car. The operation is very s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos