Do it yourself
| ||||
|
Nissan X Trail - Video tutorial
Model: Nissan X Trail
MK 3, T32
- Years 2014-2023 Inside the Nissan X-Trail, the fuses are contained in special fuse boxes that are installed in the vehicle: in this type of car, it is possible to identify two boxes designed to hold the fuses. The first box is located on the left side of the dashboard compared to the steering wheel and will be accessible by opening the driver's door: here you can find the fuses that are responsible for the operation of the radio, courtesy lights, defrosters, etc. The second box is located on the right side of the engine compartment: it contains the fuses that are responsible for the operation of the fuel pump, alternator, etc.
Posted on 25 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |