Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : Position and location of the fuses in the Nissan Navara NP300.

Nissan Navara - Video tutorial

Model: Nissan Navara D40 - Years 2005-2015
Part: Fuse box
Operation: Position and location of the fuses in the Nissan Navara NP300.

In the Nissan Navara NP300, there is a fuse box in the cabin, which is located behind the glove compartment: once the compartment is opened, we will see that it is slightly thicker towards the right side. Here is where our fuse box is located. Here, we will find the fuse for the cigarette lighter/power outlet, which is #5 for the cigarette lighter on the console and #7 for the upper front power outlet. Another fuse box can be found in the engine compartment, next to the left side of the body, in a square black box. Here, we find fuse #26, which is for the lower front power outlet. Below, we find a smaller rectangular box that contains the relays.


Posted on 18 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - What is the position of the fuse box on the Nissan Navara? Read Answer
    • Navara 2005-2015 - Where are the fuse boxes located on Nissan Navara D40? Read Answer
    • Navara 2005-2015 - Where is the towbar fuse of a Nissan Navara located? Read Answer
    • Navara 2005-2015 - Where is the Nissan Navara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos