|
Do it yourself
| |||
| ||||
How to Fix the Vibrating Dashboard on a Nissan Qashqai J11
Model: Nissan Qashqai
J11
- Years 2014-2022
In this video, learn how to fix the vibrating dashboard on a Nissan Qashqai J11. First, remove the pillar covers by lowering the seal and then pulling from the inside towards you, possibly using pliers. Next, use plastic trim tools to lever at the front part of the dashboard (the part in contact with the windscreen) to remove it. Be careful as there is a sensor in the centre that needs to be removed. Our YouTuber placed adhesive window seal along this part to prevent vibrations, and it works very well. The tweeters also vibrate, so it is advisable to secure them with some silicone. If you do not want to disassemble everything, our friend suggests wedging a rubber seal between the part of the dashboard in contact with the glass and the glass itself. This is a job you can do without removing anything and will still achieve a good result. If you have removed the grille, it is wise to check the screws underneath to ensure they do not vibrate. Optionally, you can place rubber seal pieces under the grille as well. Now, reassemble everything, confident that there will be no more vibrations.
Updated on 15 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
The instrument cluster of the Nissan Qashqai producing vibrations is a common issue with these car models. This occurs because there is play between …
Nissan Qashqai
(2014-2022 /
J11)
Knowing the location of the fuse box of your car is very important, as a first check in case of malfunctions can be done by yourself. Let's focus on …
Nissan Qashqai
(2014-2022 /
J11)
Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.085
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |