Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Such as Nissan Qashqai headlight bulbs

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Headlight bulb
Operation: Such as Nissan Qashqai headlight bulbs

To replace the headlight bulbs of the Qashqai J11 you should remove the headlights since there is not enough room for maneuver, however with a little trick you can avoid disassembly: thanks to the practical solution of fixing the bulb to the lamp holder, you can use a classic 19 mm compass to be inserted behind the bulb, thus pressing the fixing spring and freeing the bulb from its seat; the protective cap must first be removed by rotating it a few degrees counterclockwise; for the other bulbs you can proceed safely.


Posted on 22 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos