Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up Engine Oil on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Periodically checking the engine oil level is certainly a good habit to verify if there are any oil consumption issues that may depend on various factors: lack of sealing of the piston rings, failure of the valve guide seals in the cylinder head, or a sealing problem in the turbocharger.

That said, after starting the engine for a few minutes, turn it off and wait for the oil to settle in the sump; at this point, remove the dipstick, clean it, and insert it again to extract it once more: it is important that the dipstick shows oil between the minimum and maximum marks, which indicates there is one litre of oil between them.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Resetting the Oil Change Light on an Opel Mokka
Resetting the Oil Change Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, you will learn how to reset the oil change light on an Opel Mokka, first-generation model. First, turn on the instrument cluster without start…
How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
How to Reset the Oil Light on the 2015 Opel Mokka
How to Reset the Oil Light on the 2015 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this guide for your first-generation Opel Mokka (2015), discover how to manually reset the oil light. This procedure does not require any professi…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos