Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Opel Crossland 1.2

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Timing belt

Video tutorial

Today's main instructions will allow us to disassemble and replace the timing belt of the Opel Crossland X 1.2. First, we open the hood of the vehicle and start disassembling and removing the engine support on the distribution side; then we lift the vehicle and remove the front right wheel, removing the fender and then the pulley of the engine shaft (disconnecting the V-belt first), as shown in the video.

Once the distribution cover is removed, we will replace the belt with the new one, performing the engine timing.


Posted on 27 June 2025 by ScegliAuto


Related tutorials

How do you reset the Opel Crossland Service light?
How do you reset the Opel Crossland Service light?
Vauxhall Crossland X (2017-2024 / MK 1) The service light of the Opel Crossland must be reset only after performing the scheduled maintenance for that mileage reached and not before. The pl…
How to Reset the "Service" Light on an Opel Crossland X
How to Reset the "Service" Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
Where to Find and How to Access the Fuse Box on an Opel Crossland?
Where to Find and How to Access the Fuse Box on an Opel Crossland?
Vauxhall Crossland X (2017-2024 / MK 1) Hello, today you will find and access the fuse box on your Opel Crossland. First, carefully open the front engine bonnet using the release lever loca…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos