Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Brake Disc on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Brake rotors

In this guide, learn how to remove the brake disc and brake pads on an Opel Mokka. First, lift the car on a column jack and remove the wheel using a telescopic spanner or air impact wrench, along with the respective bolts. Next, undo the caliper retaining bolt and remove the caliper from the caliper bracket. Use a socket spanner to detach the caliper bracket from the wheel hub. Once the brake disc is free, unscrew the screws with a spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant components). Prepare to fit the new disc along with the new pads, brake caliper, caliper bracket, etc. Proceed with reassembly in reverse order.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Brake Disc on an Opel Mokka
Removing the Rear Brake Disc on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today, we will go through the main steps to remove and replace the rear brake discs and pads on a first-generation Opel Mokka. First, lift the vehicl…
How to Remove the Front Brake Pads on an Opel Mokka
How to Remove the Front Brake Pads on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you can start, lift the front of your Opel Mokka. Begin by removing the front wheel by unscrewing the fastening bolts. Next, unscrew and remov…
Replacing the Front Brake Pads on the Opel Mokka
Replacing the Front Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Briefly see how to remove and replace the front brake pads on the first series Opel Mokka in simple, quick steps. First, lift the vehicle and remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos