Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the fog light bulbs on an Opel/Vauxhall Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

How can you change the fog light bulb of an Opel/Vauxhall Meriva B? It is quite simple, if we do the job by moving the protection that is inside the wheel arch. In fact, the fog lights are located very low compared to the opening of the engine hood, so it is much easier to access from below: just remove the clips located in the fender, at the lowest part, and we can access the back of the headlight: on the left side it will be a bit more difficult because we have the windshield washer on that side that obstructs us, but by turning the wheel we will still access fairly easily.


Posted on 2 August 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Opel Meriva
How to Replace the Key Battery of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The video thoroughly demonstrates how to change the cover of an Opel Meriva key, including how to replace the battery. It’s quite simple: you will ne…
How to Replace the Headlight Bulb on an Opel Meriva?
How to Replace the Headlight Bulb on an Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) To replace the headlight bulb on the Opel Meriva, open the bonnet to access the components inside the engine compartment. Inside the headlight, you w…
How to Change the Battery in the Opel Meriva Key Fob
How to Change the Battery in the Opel Meriva Key Fob
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Are you unable to use the key fob for your Opel Meriva? Here’s how to change the flat battery inside. Take your key fob and use a screwdriver to pry …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos