Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat of the Opel Vivaro 2015

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Seat

If you own a 2015 Opel Vivaro and are wondering how to remove the rear seat by yourself, all you have to do is read the following procedure and apply it step by step. First, turn off the vehicle completely and reach the rear seat, then locate the two safety levers located under the seat and pull them both upwards. Once you have done this, push the entire seat backwards and then remove it completely. At this point, the procedure is successfully completed and you can potentially install a new seat.

Posted on 29 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat on Opel Vivaro
How to remove the front seat on Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Let's see how to remove the front seat (passenger side) on Opel Vivaro: disconnect the power supply terminals, first move the seat back (with the ele…
How to remove the front seat of an Opel Vivaro
How to remove the front seat of an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Let's see how to remove the front seat of an Opel Vivaro? This video explains how to proceed: disconnect the power supply terminals (if present), uns…
How do you replace the armrest of the Opel Vivaro seat?
How do you replace the armrest of the Opel Vivaro seat?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the armrest of the Opel Vivaro, you need to lower the slider of the hinge that closes the seat covering: this will allow you to remove the…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos