Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse diagram for the Opel Vivaro located?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Fuse box

The fuse diagram for the Opel Vivaro can be found in various forms and locations, namely in paper format in the vehicle's user manual, on the inner face of the fuse box covers, and online, available for download in PDF format. Regarding the fuse boxes, the one in the engine compartment is installed next to the 12-volt battery that powers the vehicle, while the second is located at the far left of the dashboard, inside the cabin. Access to them is primarily needed when troubleshooting arises.

Posted on 31 January 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse box diagram of the Opel Vivaro c used for?
What is the fuse box diagram of the Opel Vivaro c used for?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) The fuse box diagram, or rather the fuse boxes, of the Opel Vivaro C, is the document that allows us to search in the fuse box, each of these, as wel…
What is the fuse diagram for the Opel Vivaro van?
What is the fuse diagram for the Opel Vivaro van?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In this video we can see where the fuse boxes of the Opel Vivaro van are located and what their respective diagrams are, to consult in case we need t…
Diagram and positioning of the fuses in the Opel Vivaro.
Diagram and positioning of the fuses in the Opel Vivaro.
Vauxhall Vivaro (2014-2019 / MK 2) In this guide, we will see the instructions regarding the layout and positioning of the fuse boxes of the Opel Vivaro. First, we open the front drive…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos