Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Oil and Filter

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Engine oil

This tutorial demonstrates the procedure for replacing the engine oil and filter on an Opel Corsa. First, the brand and type of oil to be used are shown (a 4-litre drum of Petronas Sinthium 1000). Using an Allen key, unscrew the sump plug located underneath the vehicle and collect the old oil in a container. Meanwhile, unscrew and clean the plug located on the top of the sump. Using both hands, also unscrew the filter plug and remove it. Remove the old gasket and clean the plug thoroughly with a cloth. Now take the new filter and attach it to the plug; insert the new rubber gasket (this is usually included with the new filter). Lubricate the threads of the plug and the end of the filter with a bit of oil and insert it into its housing. Tighten it securely. Once the old oil has completely drained, refit the plug under the sump and tighten it with the Allen key. Proceed to pour in the new oil using a funnel. Finally, check that the oil level is within the range of the dipstick.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Oil on an Opel Corsa D
How to Change Oil on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Do you want to service your Opel Corsa? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate the…
What is the procedure to reset the service light on the Opel Corsa D?
What is the procedure to reset the service light on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) Time has passed and the miles have been driven; inevitably, for one reason or another, the service light comes on, indicating that the service is ove…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Vauxhall Corsa (2000-2006 / Corsa C) Lift the car with appropriate jacks and secure it with suitable supports to prevent it from falling. Place a plastic sheet and an oil collection tray…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos