|
Do it yourself
| |||
| ||||
Automatic Gearbox Oil Replacement
Model: Vauxhall Astra
Astra J
- Years:
2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
Before proceeding with the draining and replacement of the automatic gearbox oil, it is advisable to perform a cleaning using a specific additive: first, unscrew the filler (or level) plug of the gearbox and insert the additive. In the video, the procedure is carried out with specific equipment. Once the additive is inserted, screw the plug back on, start the engine, and engage all gears to allow the additive to circulate throughout the gears. Then proceed to drain the gearbox oil; screw the plugs back on. Next, intercept the oil inlet and return pipes to connect the equipment hoses: at this point, start the filling procedure of the gearbox with new oil, start the engine, and let all the used oil drain out, which will be replaced by the new oil; finally, add the additive and bring the gearbox oil to the correct level. Disconnect the device hoses and reconnect the original system hoses. Finally, check the gearbox oil level when hot. The video also shows the cleaning of the intake ducts with a specific spray, the insertion of the internal engine cleaning additive followed by oil replacement (plus additive), oil filter, and the replacement of the fuel, air, and cabin filters.
Updated on 6 February 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2009-2016 /
Astra J)
To reset the automatic gearbox on an Opel Astra, connect a diagnostic tool to the vehicle's OBD port, located on the dashboard just below the steerin…
Vauxhall Astra
(2015-2022 /
Astra K)
In order to unlock the automatic transmission of the Opel Astra, you will need to lever with an object such as a screwdriver to remove the cover of t…
Vauxhall Astra
(2015-2022 /
Astra K)
In this video, we show how to reset the automatic gearbox of an Opel Astra: start by turning the ignition key to the second position, then press the …
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light on a Kia Rio?
The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |