Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Spark plugs

Lift the bonnet and place the support rod. Unscrew the screws securing the engine cover. Disconnect the connector for the ignition coil. Now unscrew the four screws securing the spark plug cover (the one with the coils), and remove it by levering from underneath with a wedge and pulling it out of its seat. Unscrew the spark plugs. Install the new spark plugs by simply inserting them into their seats and screwing them in. Screw the cover back on and reconnect the ignition coil connector, then reassemble the engine cover. At the end of the procedure, start the engine and let it run for a few minutes.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Opel Meriva 2008 located?
Where is the OBD port of the Opel Meriva 2008 located?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) If you own a first edition Opel Meriva (year 2008) and want to easily locate the OBD port, all you have to do is follow the steps described below. Fi…
Where is the OBD2 port located on the Opel Meriva A?
Where is the OBD2 port located on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Knowing the location where the OBD2 port of your Opel Meriva A is installed is very important as it allows you to connect any compatible diagnostic t…
How to Replace the Key Battery of the Opel Meriva
How to Replace the Key Battery of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The video thoroughly demonstrates how to change the cover of an Opel Meriva key, including how to replace the battery. It’s quite simple: you will ne…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos