Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radiator from an Opel Combo

Model: Vauxhall Combo MK 3, Combo C - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Radiator

See other generations:
Video tutorial

In this video, we will see the instructions that will allow us to remove the engine cooling radiator from an Opel Combo CDTi. First, remove the front bumper by unscrewing all the fastening screws found at the top and on the wheel arches; once removed, proceed to disconnect the hoses for the radiator and intercooler by unscrewing the clip screws.

At this point, unscrew all the fastening screws for the radiator and fan, also disconnecting the thermostat, following the video tutorial to the end!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located in the Opel Combo?
Where Are the Fuses Located in the Opel Combo?
Vauxhall Combo (2019-2026 / Combo E, MK 5) Each fuse in the Opel Combo is located inside one of the dedicated fuse boxes present in the vehicle: in this type of vehicle, you will find two boxe…
Where is the fuse box of the Opel Combo E located?
Where is the fuse box of the Opel Combo E located?
Vauxhall Combo (2019-2026 / Combo E, MK 5) If you are looking for the fuse box inside your Opel Combo E, all you have to do is carefully read the procedure described in the following guide and…
Removing the Front Bumper from an Opel Combo C
Removing the Front Bumper from an Opel Combo C
Vauxhall Combo (2001-2011 / MK 3, Combo C) Today, you will learn how to remove the front bumper from an Opel Combo C. First, open and lift the bonnet, then remove the plastic trims from the wh…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos